Find us on Facebook Follow us on Twitter Check out our YouTube Channel

Ski-Doo Product Updates for 2019

There are more specific improvements that have been made to each model based on their expected use, which include combinations of new engine mounts (specific designs for mountain or trail use), a finned secondary pulley, new pulley calibrations and the additional intake ducting mentioned above.
RELATED TOPICS: SKI-DOO | SNOWMOBILE NEWS
There have been some improvements to 2019 snowmobiles since the Snow Shoot introduction that Ski-Doo would like to inform you of as these sleds arrive in dealerships.

At Club Ski-Doo in February they announced some of the changes you see here, but this communication will clarify and finalize those.

The most easily noticed change will be an air intake vent on the left side panel for all Summit, Freeride, MXZ, Backcountry and most Renegade E-TEC powered models (Renegade Enduro will not have this). This is a product improvement in 2019 for additional CVT system cooling and the only outward visual cue customers will see as they visit dealer showrooms. Behind the side panel there is additional ducting and a new belt guard that directs air for cooling from the intake vent to the secondary pulley. There are already some social media comments about the vent, but contrary to many of those, this is an intakecooling vent, not an exhaust vent.

There are more specific improvements that have been made to each model based on their expected use, which include combinations of new engine mounts (specific designs for mountain or trail use), a finned secondary pulley, new pulley calibrations and the additional intake ducting mentioned above. Please see below for affected models and details.
ScreenShot20180814at22615PM
For customers with REV Gen4 snowmobiles that experienced premature belt failure, Ski-Doo invites them to visit their dealership. Warranty Bulletin 2018-10 has been issued to provide them assistance in resolving any issues. Investigation of 2018 sleds that experienced premature failures identified the issue was localized in very specific conditions (altitude, snow conditions and riding styles) and related to engine movement plus clutch clamping force; the new mounts along with an updated CVT calibration will resolve this.
COMMENT ON THIS ARTICLE
Want to leave a comment?
Only registered members of AmSnow.com are allowed to leave comments. Registration is FREE and only takes a couple minutes.

Login or Register now.
0
Sign up for our free newsletter
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.

IN THE MAGAZINE