It’s rare that one brand so thoroughly dominates snocross racing like Ski-Doo with its MXZx 600RS did for the past two seasons. Winning the Pro, Pro-Lite and Pro Women and multiple amateur points championships in the ISOC snocross series – the undisputed most contested circuit – the last two years, speaks volumes about the strength of the racing-specific MXZx 600RS. Most people would tell Ski-Doo not to mess with a good thing, but this is racing and nothing stands still.
The MXZx 600RS E-TEC uses the industry leading REV Gen4 platform with its open cockpit design and centrally balanced engine for superior rider ergonomics and handling in rough conditions. The Gen4 layout delivers agility and responsiveness while the Ergo Step side panels and beveled tunnel allow racers the room they need to attack the course - without interference from the chassis. For 2021 the visible changes are with the front shocks as they upgrade to the 46 mm KYB Pro Series that typically have been available only on a limited basis to the Super teams. Integral Base Valves on all shocks add the ability to adjust not only High and Low Speed Compression but also High Speed rebound. Suspension calibration has changed to match the new shocks with the rest of chassis and is based on direct rider feedback to further handling benefits.
The changes from last year all carry forward; rear of chassis with a re-designed tunnel, heat exchanger, bumper and now new taillight that meets SSCC standards. All shocks, including the new fronts, use the Integral Base Valve that was originally developed on the factor shocks.
The 137 rMotion rear suspension features a sturdy rail design, unique racing geometry and a proven holeshot device.
The RAS 3 front suspension features a long spindle that allows high cornering speeds and a unique race sled only power steering system that provides ultra-precise handling with less effort.
The Rotax 600RS E-TEC engine features E-TEC direct injection, that always delivers quick response and perfect calibration no matter the altitude or weather conditions so racers and their crew have less to worry about. New calibrations for 2021 further refine the holeshot and mid-range power. Other features include booster injectors first deployed on the Rotax 850 E-TEC, a short intake tract with double reeds and digital eRAVE.
2021 MXZx 600RS Highlights
REV Gen4 Platform
Taper/tilt tunnel design
Short heat exchanger with internal loop
137” Track
Lightweight Lexan Hood
LED Lightweight Headlights
Reinforced E and S modules
MX inspired seat
NEW taillight – SSCC compliant
Racing foot box
5-gallon fuel tank
Lower center of gravity
High Air Flow Left Vent
RAS 3 Front Suspension
NEW Kashima coated 46mm KYB Pro R Series shocks (High Speed /Low Speed compression and High Speed / Low Speed Rebound adjustments)
NEW shock calibration
Integral Base Valve Adjuster
Rack steering with power assist
Long Spindle design (Stronger + better speed cornering)
Lightweight Pilot R2 Ski - Reinforced
Racing rMotion Rear Suspension
Race proven rail design – stronger
Integral Base Valve Adjuster
NEW shock calibration
137” length
Lightweight Front and rear arms
Kashima coated 46mm KYB Pro Series piggy back center shock w/ High Speed / Low Speed compression and High Speed Rebound adjustment
Kashima coated 46mm KYB Pro Series piggy back rear shock w/ High Speed / Low Speed compression and High Speed / Low Speed rebound adjustment
Optimized geometry (race proven motion Ratio front and back)
Rotax 600RS E-TEC Engine (599.4 cc)
E-TEC direct injection
Mono block cylinder design with Plasma coating- delivering more horsepower
NEW engine calibration
Intake booster injectors (850-inspired)
Shorter intake length (850-inspired)
Double reed valves (850-inspired)
eRAVE (850-inspired)
Lightweight exhaust system (Stainless steel tuned pipe)
Racing Throttle Block – Ready for 50% throttle applications
Reinforced engine mounts
Hot Start Button
Drivetrain
Larger brake backing plate
Brembo Brake System – large diameter rotor, easy maintenance caliper
pDrive primary clutch
TEAM TSS-04 secondary clutch
Revised slip gear – Better durability, less maintenance
RS drive axle (Lighter)
Lightweight belt guard – better air flow